analytical pump – Icon Scientific Inc. https://www.iconsci.com Highest Quality Liquid Chromatography Products & Service Mon, 26 Oct 2020 18:26:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.iconsci.com/wp-content/uploads/2019/03/favicon.png analytical pump – Icon Scientific Inc. https://www.iconsci.com 32 32 BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30fa/ Sat, 09 Mar 2019 11:20:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30fa/ Stainless Steel pump head

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range


50 ml pump head05101520253035404550200250300350400flow rate [ml/min]maximum pressure [bar]

flow rate 50 ml pump head
0 300
9.99 300
10 200
50 200
Pump head materials Stainless Steel
Maximum viscosity 100 mPa·s
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide

Detailed information

Best working conditions 0.1 – 40.0 ml/min
Continuous working conditions 0.1 – 20.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30fb/ Thu, 07 Mar 2019 11:21:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30fb/ Ceramic pump head, 50 ml/min

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 2900 psi
Maximum delivery pressure [bar] 200 bar
Maximum delivery pressure [MPa] 20 MPa
Pressure range


50 ml pump head05101520253035404550200250300350400flow rate [ml/min]maximum pressure [bar]

flow rate 50 ml pump head
0 200
9.99 200
10 200
50 200
Pump head materials Ceramic
Maximum viscosity 100 mPa·s
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management No
Wetted materials aluminum oxide (Al2O3), ceramic, FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continuous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30ea/ Wed, 06 Mar 2019 12:00:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30ea/ Stainless Steel pump head

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 9430 psi
Maximum delivery pressure [bar] 650 bar
Maximum delivery pressure [MPa] 65 MPa
Pressure range


10 ml pump head012345678910400500600700800flow rate [ml/min]maximum pressure [bar]

flow rate 10 ml pump head
0 700
4.99 700
5 400
10 400
Pump head materials Stainless Steel
Maximum viscosity 100 mPa·s
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continuous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30ee/ Wed, 06 Mar 2019 11:28:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30ee/ Stainless Steel pump head (for high-temperature applications)

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 9430 psi
Maximum delivery pressure [bar] 650 bar
Maximum delivery pressure [MPa] 65 MPa
Pressure range


10 ml pump head012345678910400500600700800flow rate [ml/min]maximum pressure [bar]

flow rate 10 ml pump head
0 700
4.99 700
5 400
10 400
Pump head materials Stainless Steel
Maximum viscosity 100 mPa·s
Liquid temperature range 4−120 °C (39.2−248 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continuous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30fe/ Wed, 06 Mar 2019 11:25:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30fe/ Stainless Steel pump head for high temperature applications

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range


50 ml pump head05101520253035404550200250300350400flow rate [ml/min]maximum pressure [bar]

flow rate 50 ml pump head
0 300
9.99 300
10 200
50 200
Pump head materials Stainless Steel
Maximum viscosity 100 mPa·s
Liquid temperature range 4−120 °C (39.2−248 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide

Detailed information

Best working conditions 0.1 – 40.0 ml/min
Continuous working conditions 0.1 – 20.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30fh/ Wed, 06 Mar 2019 11:14:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30fh/ Stainless Steel pump head for high temperature applications with back piston flushing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range


50 ml pump head05101520253035404550200250300350400flow rate [ml/min]maximum pressure [bar]

flow rate 50 ml pump head
0 300
9.99 300
10 200
50 200
Pump head materials Stainless Steel
Maximum viscosity 100 mPa·s
Liquid temperature range 4−120 °C (39.2−248 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide

Detailed information

Best working conditions 0.1 – 40.0 ml/min
Continuous working conditions 0.1 – 20.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 40P https://www.iconsci.com/shop/blueshadow-pump-40p-apc30eb/ Wed, 06 Mar 2019 11:04:00 +0000 https://www.iconsci.com/products/blueshadow-pump-40p-apc30eb/ Ceramic pump head

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]>

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Ceramic
Maximum viscosity 100 mPa·s
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), ceramic, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continuous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing

The post BlueShadow Pump 40P appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-2/ Tue, 28 Aug 2018 18:01:00 +0000 https://www.iconsci.com/products/azurap41s-2/ Ultra-compact high pressure pump

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

The AZURA pump P 4.1S (APG20EC) is developed for the eluent delivery with flow rates up to 10 ml/min and a maximum delivery pressure of 400 bar. This compact pump can easily be integrated into every HPLC system. It can be used as a small HPLC pump, an injection module or dosing pump. This device variant is the chemical resistant version with a pump head made of Hastelloy® C.

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Hastelloy® C-276
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), FFKM, Titanium, aluminum oxide (Al2O3), Hastelloy® C, KEL-F® (PCTFE), ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1−8.0 ml/min
Continuous working conditions 0.1−4.0 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-2/ Fri, 13 Apr 2018 17:12:00 +0000 https://www.iconsci.com/products/azurap61l-2/ isocratic pump max flow 50ml/min Stainless Steel isocratic

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L  isocratic pump max flow 50ml/min Stainless Steel isocratic

Technical Data

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range  4 13 2018 6 42 32 PM
Pump head materials Stainless Steel
Gradient Isocratic
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 40.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range
Gradient minimum increment
Degasser No
Solvent selection valve No
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 11.5 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 4.3 MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 4.3 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph65eb/ Thu, 08 Mar 2018 11:25:00 +0000 https://www.iconsci.com/products/azurap61l-aph65eb/ Binary Azura pump P6.1L,pressure range 400 bar

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> Binary Azura pump P6.1L,pressure range 400 bar up to 10ml/min, flow rate range 0,001-10ml/min,
Ceramic with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA LPG module for Pump P 2.1L in PEEK https://www.iconsci.com/shop/azuralpgmoduleforpumpp21linpeek/ Tue, 13 Feb 2018 16:12:00 +0000 https://www.iconsci.com/products/azuralpgmoduleforpumpp21linpeek/ Ternary LPG module for flow rates up to 220 ml/min, PEEK.

The post AZURA LPG module for Pump P 2.1L in PEEK appeared first on Icon Scientific Inc..

]]> By adding the AZURA LPG module to the AZURA preparative HPLC pump P 2.1L, the isocratic pump can be transformed to a ternary low pressure gradient system.# DELIVERIES STARTING NOVEMBER 2015

Technical Data

General Information

Flow rate range 2 – 220 ml/min
Gradient Low Pressure Gradient (ternary)
Wetted materials FFKM, PEEK

The post AZURA LPG module for Pump P 2.1L in PEEK appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph34ga/ Tue, 13 Feb 2018 15:48:00 +0000 https://www.iconsci.com/products/azurap61l-aph34ga/ Quaternary Azura pump 6.1L LPG for UHPLC, pressure range to 1000 bar up to 5ml/min, stainless steel

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Low Pressure Pump with 5 ml pump head, stainless steel

Technical Data

General Information

Max. flow rate 5 ml/min
Flow rate range 0.001 – 5 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 14500 psi
Maximum delivery pressure [bar] 1000 bar
Maximum delivery pressure [MPa] 100 MPa
Pressure range
Pump head materials Stainless Steel
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.02 – 5 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 160 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph34ea/ Tue, 13 Feb 2018 15:35:00 +0000 https://www.iconsci.com/products/azurap61l-aph34ea/ Quaternary low pressure gradient pump 10 ml / min S.S. with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Low Pressure Pump with 10 ml pump head, Ceramic

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 10150 psi
Maximum delivery pressure [bar] 700 bar
Maximum delivery pressure [MPa] 70 MPa
Pressure range
Pump head materials Stainless Steel
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 160 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph64eb/ Tue, 13 Feb 2018 15:13:00 +0000 https://www.iconsci.com/products/azurap61l-aph64eb/ Quaternary LPG gradient 10 ml / min Ceramic with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Quaternary low pressure gradient pump with 10 ml pump head, Ceramic

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pressure range
Pump head materials Ceramic
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 250 µl
Delay volume 350 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph35ga/ Tue, 13 Feb 2018 14:39:00 +0000 https://www.iconsci.com/products/azurap61l-aph35ga/ Binary Ultra High pressure gradient 5 ml / Min S.S. With degasser UHPLC

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Ultra High Pressure Pump with 5 ml pump head, stainless steel

Technical Data

General Information

Max. flow rate 5 ml/min
Flow rate range 0.001 – 5 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 14500 psi
Maximum delivery pressure [bar] 1000 bar
Maximum delivery pressure [MPa] 100 MPa
Pressure range
Pump head materials Stainless Steel
Gradient High Pressure Gradient (binary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.02 – 5 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 5 – 95 %
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar (ethanol/caffeine tracer) ± 1 % (5 – 95 %, measured at 0.1 – 10 ml/min, water/caffeine tracer)
Gradient precision < 0.1 % RSD at 1 ml/min, 0.3% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 110 µl with 100 µl Mixer
Pump type Binary analytical HPLC pump with degasser
Degasser Yes
Solvent selection valve 2 x 2 channels
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 14.1 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph35ed/ Tue, 13 Feb 2018 14:24:00 +0000 https://www.iconsci.com/products/azurap61l-aph35ed/ Binary High pressure gradient 10 ml / Min S.S. With degasser for normal phase applications

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L High Pressure Pump with 10 ml pump head for Normal Phase Applications, stainless steel

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 10150 psi
Maximum delivery pressure [bar] 700 bar
Maximum delivery pressure [MPa] 70 MPa
Pressure range
Pump head materials Stainless Steel
Gradient High Pressure Gradient (binary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 5 – 95 %
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar (ethanol/caffeine tracer) ± 1 % (5 – 95 %, measured at 0.1 – 10 ml/min, water/caffeine tracer)
Gradient precision < 0.1 % RSD at 1 ml/min, 0.3% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 110 µl with 100 µl Mixer
Pump type Binary analytical HPLC pump with degasser
Degasser Yes
Solvent selection valve 2 x 2 channels
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 14.1 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph35ea/ Tue, 13 Feb 2018 12:58:00 +0000 https://www.iconsci.com/products/azurap61l-aph35ea/ Binary, HPG, stainless steel 10ml. with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Binary, HPG, stainless steel 10ml. with degasser

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 10,150 psi
Maximum delivery pressure [bar] 700 bar
Maximum delivery pressure [MPa] 70 MPa
Pressure range  APH35EA pressure range
Pump head materials Stainless Steel
Gradient High Pressure Gradient (binary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 5 – 95 %
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar (ethanol/caffeine tracer) ± 1 % (5 – 95 %, measured at 0.1 – 10 ml/min, water/caffeine tracer)
Gradient precision < 0.1 % RSD at 1 ml/min, 0.3% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 110 µl with 100 µl Mixer
Pump type Binary analytical HPLC pump with degasser
Degasser Yes
Solvent selection valve 2 x 2 channels
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 14.1 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s/ Fri, 09 Feb 2018 16:26:00 +0000 https://www.iconsci.com/products/azurap41s/ 50 ml/min pump head, stainless steel

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

AZURA P 2.1S and P 4.1S pump are developed for eluent delivery up to 400 bar and for flow rates up to 10 ml/min in HPLC and other applications where a compact easy-to-integrate pump is required.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01−50 ml/min
Flow rate increment 0.01
Maximum delivery pressure [psi] 2180 psi
Maximum delivery pressure [bar] 150 bar
Maximum delivery pressure [MPa] 15 MPa
Pump head materials Stainless Steel
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), aluminum oxide (Al2O3), FKM, PEEK, ruby, sapphire, stainless steel, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 1.0−40.0 ml/min
Continous working conditions 3−25 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-apg20fb/ Fri, 09 Feb 2018 16:16:00 +0000 https://www.iconsci.com/products/azurap41s-apg20fb/ 50 ml/min pump head, ceramic

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

AZURA P 2.1S and P 4.1S pump are developed for eluent delivery up to 400 bar and for flow rates up to 10 ml/min in HPLC and other applications where a compact easy-to-integrate pump is required.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01−50 ml/min
Flow rate increment 0.01
Maximum delivery pressure [psi] 2180 psi
Maximum delivery pressure [bar] 150 bar
Maximum delivery pressure [MPa] 15 MPa
Pump head materials Ceramic
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), Titanium, aluminum oxide (Al2O3), ceramic, FKM, PEEK, sapphire, ruby, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 1.0−40.0 ml/min
Continous working conditions 3−25 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-apg20ea/ Fri, 09 Feb 2018 16:02:00 +0000 https://www.iconsci.com/products/azurap41s-apg20ea/ 10 ml/min pump head, stainless steel

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Stainless steel pump head

The AZURA pump P 4.1S (APG20EA) is developed for the eluent delivery with flow rates up to 10 ml/min and a maximum delivere pressure of 400 bar. This compact pump can easily be integrated into every HPLC system. It can be used as a small HPLC pump, an injection module or dosing pump. This device variant is the standard version with a pump head made of stainless steel.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Stainless Steel
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), Titanium, ruby, sapphire, aluminum oxide (Al2O3), FKM, PEEK, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1−8.0 ml/min
Continous working conditions 0.1−4.0 ml/min
Flow rate accuracy ±1%
Flow rate accuracy conditions 5 – 50% of flow range using ethanol/water 10:90
Flow rate precision measured at 1 ml/min using ethanol/water 10:90
Flow rate precision conditions ≤ 0.5 % RSD
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]>