BlueShadow Pump 40P

Product No:

APC30FH

Stainless Steel pump head for high temperature applications with back piston flushing


General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range


50 ml pump head05101520253035404550200250300350400flow rate [ml/min]maximum pressure [bar]

flow rate 50 ml pump head
0 300
9.99 300
10 200
50 200
Pump head materials Stainless Steel
Maximum viscosity 100 mPa·s
Liquid temperature range 4−120 °C (39.2−248 °F)
Gradient Isocratic
Leak management No
Wetted materials GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide

Detailed information

Best working conditions 0.1 – 40.0 ml/min
Continuous working conditions 0.1 – 20.0 ml/min
Flow rate accuracy ± 1%
Flow rate accuracy conditions measured at 5 – 80% of flow range using ethanol
Flow rate precision < 0.1 % RSD
Flow rate precision conditions based on retention time at constant room temperature
Degasser No
Pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing Active
System protection soft start, Pmin and Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen
Control LAN, Analog and event control,
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt
Dimensions 399 mm x 242 mm x 165 mm (D x W x H)
Weight 5.1 kg
Leak sensor No
Ambient conditions 10–40 °C (50–104 °F)
Air humidity: below 90 % humidity, non condensing