This tablet lock is ideal for a mobile solution for securing a tablet in a temporary work space. The protection has been designed so that it does not get in the way when the tablet is picked up for use.

The post Tablet Lock appeared first on Icon Scientific Inc..

This tablet lock is ideal for a mobile solution for securing a tablet in a temporary work space. The protection has been designed so that it does not get in the way when the tablet is picked up for use. The stand can be used with the lock-secured tablet and serves as handy storage and holder during operation.

The post Tablet Lock with stand appeared first on Icon Scientific Inc..

Tilt and swivel mount for 7-10″ tablet and installation on AZURA L devices.

The post Mobile Control Tablet Mount appeared first on Icon Scientific Inc..

Upgrade your Mobile Control license to Mobile Control Chrom and benefit from data acquisition and enhanced reporting capabilities. The Mobile Control Chrom is an intuitive and cost-effective software solution for controlling and monitoring your AZURA devices and systems. In addition, you can acquire data from AZURA detectors allowing simple measurements. Detector traces, auxiliary traces and method parameters can be recorded, graphically depicted, analyzed, reported and exported at the click of a button. The clear system overview provides instant information on key parameters and system status. Adjust and operate single devices or even whole systems with a few fingertips. The well-structured block programming assists you to clearly and quickly automate device control. A smart user management makes the Mobile Control safe. Device parameters can only be changed by authorized operators. The automated check of GLP data helps you avoid problems and unexpected downtime as well as to plan maintenance controls. You can install the Mobile Control software on a tablet, laptop or PC. Free updates enable you to take advantage of new devices and features as soon as they are released with no extra cost. On top of full access to AZURA devices Mobile Control Chrom allows you to acquire data from AZURA detectors.

System requirements

• Operating system: Windows 10
• Communication: WIFI or LAN
• Display size: minimum 10″
• Display resolution: 1024 x 768 or 1280 x 800 (optimized)
• RAM: 1 GB (Mobile Control), 2 GB (Mobile Control Chrom)
• Processor: 1.5 GHz, Dual-Core
• Disc space: 200 MB

Supported Instruments

• P2.1S/P4.1S – Firmware V01.37 or higher
• P 6.1L – Firmware V01.05 or higher
• P 2.1L – Firmware V01.09 or higher
• UVD 2.1S – Firmware V01.11 or higher
• UVD 2.1L – Firmware V02.06 or higher
• MWD 2.1L – Firmware V01.10 or higher
• DAD 2.1L – Firmware V01.10 or higher
• DAD 6.1L – Firmware V01.23 or higher
• RID 2.1L – Firmware V01.15 or higher
• V 2.1S – Firmware V05.01 or higher
• ASM 2.1L – Firmware V01.13 or higher
• CT 2.1 – Firmware V01.06 or higher
• AS 3950 – Firmware V01.16 or higher
• AS 6.1L – Firmware V1.17 or higher
• IFU 2.1 LAN – Firmware V 1.05 or higher

Technical Data

The post Mobile Control Upgrade License appeared first on Icon Scientific Inc..

The Mobile Control Chrom is an intuitive and cost-effective software solution for controlling and monitoring your AZURA devices and systems. In addition, you can acquire data from AZURA detectors allowing simple measurements. Detector traces, auxiliary traces and method parameters can be recorded, graphically depicted, analyzed, reported and exported at the click of a button. The clear system overview provides instant information on key parameters and system status. Adjust and operate single devices or even whole systems with a few fingertips. The well-structured block programming assists you to clearly and quickly automate device control. A smart user management makes the Mobile Control safe. Device parameters can only be changed by authorized operators. The automated check of GLP data helps you avoid problems and unexpected downtime as well as to plan maintenance controls. You can install the Mobile Control software on a tablet, laptop or PC. Free updates enable you to take advantage of new devices and features as soon as they are released with no extra cost. Your Mobile Control license can be easily upgraded to Mobile Control Chrom with data acquisition. On top of full access to AZURAdevices Mobile Control Chrom allows you to acquire data from AZURA detectors.

System requirements

• Operating system: Windows 10
• Communication: WIFI or LAN
• Display size: minimum 10″
• Display resolution: 1024 x 768 or 1280 x 800 (optimized)
• RAM: 1 GB (Mobile Control), 2 GB (Mobile Control Chrom)
• Processor: 1.5 GHz, Dual-Core
• Disc space: 200 MB

Supported Instruments

• P2.1S/P4.1S – Firmware V01.37 or higher
• P 6.1L – Firmware V01.05 or higher
• P 2.1L – Firmware V01.09 or higher
• UVD 2.1S – Firmware V01.11 or higher
• UVD 2.1L – Firmware V02.06 or higher
• MWD 2.1L – Firmware V01.10 or higher
• DAD 2.1L – Firmware V01.10 or higher
• DAD 6.1L – Firmware V01.23 or higher
• RID 2.1L – Firmware V01.15 or higher
• V 2.1S – Firmware V05.01 or higher
• ASM 2.1L – Firmware V01.13 or higher
• CT 2.1 – Firmware V01.06 or higher
• AS 3950 – Firmware V01.16 or higher
• AS 6.1L – Firmware V1.17 or higher
• IFU 2.1 LAN – Firmware V 1.05 or higher

Technical Data

The post Mobile Control Chrom License appeared first on Icon Scientific Inc..

The Mobile Control is an intuitive and cost-effective software solution for controlling and monitoring your AZURA devices and systems. The clear system overview provides instant information on key parameters and system status. Adjust and operate single devices or even whole systems with a few fingertips. The well-structured block programming assists you to clearly and quickly automate device control. A smart user management makes the Mobile Control safe. Device parameters can only be changed by authorized operators. The automated check of GLP data helps you avoid problems and unexpected downtime as well as to plan maintenance controls. You can install the Mobile Control software on a tablet, laptop or PC. Free updates enable you to take advantage of new devices and features as soon as they are released with no extra cost. Your Mobile Control license can be easily upgraded to Mobile Control Chrom with data acquisition.
With Mobile Control you have always full access to AZURA devices.

System requirements

• Operating system: Windows 10
• Communication: WIFI or LAN
• Display size: minimum 10″
• Display resolution: 1024 x 768 or 1280 x 800 (optimized)
• RAM: 1 GB (Mobile Control), 2 GB (Mobile Control Chrom)
• Processor: 1.5 GHz, Dual-Core
• Disc space: 200 MB

Supported Instruments

• P2.1S/P4.1S – Firmware V01.37 or higher
• P 6.1L – Firmware V01.05 or higher
• P 2.1L – Firmware V01.09 or higher
• UVD 2.1S – Firmware V01.11 or higher
• UVD 2.1L – Firmware V02.06 or higher
• MWD 2.1L – Firmware V01.10 or higher
• DAD 2.1L – Firmware V01.10 or higher
• DAD 6.1L – Firmware V01.23 or higher
• RID 2.1L – Firmware V01.15 or higher
• V 2.1S – Firmware V05.01 or higher
• ASM 2.1L – Firmware V01.13 or higher
• CT 2.1 – Firmware V01.06 or higher
• AS 3950 – Firmware V01.16 or higher
• AS 6.1L – Firmware V1.17 or higher
• IFU 2.1 LAN – Firmware V 1.05 or higher

Technical Data

The post Mobile Control License appeared first on Icon Scientific Inc..

Mobile Control Chrom is an intuitive and cost-effective software solution for controlling and monitoring your AZURA devices and systems. In addition you can acquire data from AZURA detectors allowing simple measurements. Detector traces, auxiliary traces and method parameters can be recorded, graphically depicted, analyzed, reported and exported at the click of a button. The clear system overview provides instant information on key parameters and system status. Adjust and operate single devices or even whole systems with a few fingertips. The well-structured block programming assists you to clearly and quickly automate device control. A smart user management makes the Mobile Control safe. Device parameters can only be changed by authorized operators. The automated check of GLP data helps you avoid problems and unexpected downtime as well as to plan maintenance controls. With the hand-held Mobile Control option you can check your system remotely, allowing you to oversee multiple systems from the comfort of your office. Alternatively you can install the Mobile Control directly on your Laptop or PC. Free updates enable you to take advantage of new devices and features as soon as they are released with no extra cost. On top of full access to AZURA devices Mobile Control Chrom allows you to acquire data from AZURA detectors.

System requirements

• Operating system: Windows 10
• Communication: WIFI or LAN
• Display size: minimum 10″
• Display resolution: 1024 x 768 or 1280 x 800 (optimized)
• RAM: 1 GB (Mobile Control), 2 GB (Mobile Control Chrom)
• Processor: 1.5 GHz, Dual-Core
• Disc space: 200 MB

Supported Instruments

• P2.1S/P4.1S – Firmware V01.37 or higher
• P 6.1L – Firmware V01.05 or higher
• P 2.1L – Firmware V01.09 or higher
• UVD 2.1S – Firmware V01.11 or higher
• UVD 2.1L – Firmware V02.06 or higher
• MWD 2.1L – Firmware V01.10 or higher
• DAD 2.1L – Firmware V01.10 or higher
• DAD 6.1L – Firmware V01.23 or higher
• RID 2.1L – Firmware V01.15 or higher
• V 2.1S – Firmware V05.01 or higher
• ASM 2.1L – Firmware V01.13 or higher
• CT 2.1 – Firmware V01.06 or higher
• AS 3950 – Firmware V01.16 or higher
• AS 6.1L – Firmware V1.17 or higher
• IFU 2.1 LAN – Firmware V 1.05 or higher

Technical Data

The post Mobile Control Chrom appeared first on Icon Scientific Inc..

The Mobile Control is an intuitive and cost-effective software solution for controlling and monitoring your AZURA devices and systems. The clear system overview provides instant information on key parameters and system status. Adjust and operate single devices or even whole systems with a few fingertips. The well-structured block programming assists you to clearly and quickly automate device control. A smart user management makes the Mobile Control safe. Device parameters can only be changed by authorized operators. The automated check of GLP data helps you avoid problems and unexpected downtime as well as to plan maintenance controls. With the hand-held Mobile Control option, you can check your system remotely, allowing you to oversee multiple systems from the comfort of your office. Alternatively, you can install the Mobile Control directly on your Laptop or PC. Free updates enable you to take advantage of new devices and features as soon as they are released with no extra cost. Your Mobile Control license can be easily upgraded to Mobile Control Chrom with data acquisition. With Mobile Control you have always full access to AZURA devices.

System requirements

• Operating system: Windows 10
• Communication: WIFI or LAN
• Display size: minimum 10″
• Display resolution: 1024 x 768 or 1280 x 800 (optimized)
• RAM: 1 GB (Mobile Control), 2 GB (Mobile Control Chrom)
• Processor: 1.5 GHz, Dual-Core
• Disc space: 200 MB

Supported devices

• P2.1S/P4.1S – Firmware V01.37 or higher
• P 6.1L – Firmware V01.05 or higher
• P 2.1L – Firmware V01.09 or higher
• UVD 2.1S – Firmware V01.11 or higher
• UVD 2.1L – Firmware V02.06 or higher
• MWD 2.1L – Firmware V01.10 or higher
• DAD 2.1L – Firmware V01.10 or higher
• DAD 6.1L – Firmware V01.23 or higher
• RID 2.1L – Firmware V01.15 or higher
• V 2.1S – Firmware V05.01 or higher
• ASM 2.1L – Firmware V01.13 or higher
• CT 2.1 – Firmware V01.06 or higher
• AS 3950 – Firmware V01.16 or higher
• AS 6.1L – Firmware V1.17 or higher
• IFU 2.1 LAN – Firmware V 1.05 or higher

Technical Data

The post Mobile Control appeared first on Icon Scientific Inc..