DOSING-PUMP – Icon Scientific Inc. https://www.iconsci.com Highest Quality Liquid Chromatography Products & Service Wed, 25 Jan 2023 18:15:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.iconsci.com/wp-content/uploads/2019/03/favicon.png DOSING-PUMP – Icon Scientific Inc. https://www.iconsci.com 32 32 ECP2300 Preparative Pump https://www.iconsci.com/shop/ecp2300-preparative-pump/ Wed, 25 Jan 2023 18:15:27 +0000 https://www.iconsci.com/?post_type=product&p=4815 These pumps work as isocratic pumps and together with the gradient box also as a gradient pump. ECB2005 (ECB2005PC) Gradient Box is equipped with […]

The post ECP2300 Preparative Pump appeared first on Icon Scientific Inc..

]]> These pumps work as isocratic pumps and together with the gradient box also as a gradient pump.

ECB2005 (ECB2005PC) Gradient Box is equipped with a four-way gradient mixing valve and must be ordered together with the pump. Also available in configurations made of certified bio-inert materials.

These pumps are suited for preparative applications in liquid chromatography. These are designed with main and auxiliary pump heads connected in parallel, with a piston diameter of 3/8 ”. This new sophisticated unit allows achieving a precise low-pressure gradient, i.e. gradual changes of solvent composition by mixing up to four liquids at the pump’s entry. It is also possible to predefine the percentage of composition when using the pump in isocratic mode. The gradient profile can be defined from the computer or manually using a display and keypad. There are many improvements that make the pump more reliable, including a new learning algorithm for pulsation suppression; leakage sensor, etc.

When necessary, it is possible to use back-washing of the pistons (e.g. when using buffered mobile phase).

The pumps is supported by ECOMAC and Clarity software. 

All pumps are delivered with GFP (PTFE) seals as a default, optimal recommended seals are UHMW-PE seals (ask for more information).

This pump is equipped with the Pressure Compensation Learningalgorithm. Thanks to this smart adaptive process, the pump regulates the rotation speed of the camshaft and measures its impact on pressure pulsation to minimize the output pulsation as much as possible. The algorithm, due to its adaptive capacity, is applicable for many combinations of pump working conditions (solvents, columns, etc.).

The post ECP2300 Preparative Pump appeared first on Icon Scientific Inc..

]]> 1000 ml/min ECP201L Preparative Pump https://www.iconsci.com/shop/1000-ml-min-ecp201l-preparative-pump/ Wed, 25 Jan 2023 18:00:10 +0000 https://www.iconsci.com/?post_type=product&p=4813 Preparative HPLC pump with a flow rate range of up to 1000 ml/min.   The ECP201L Preparative Pump is an […]

The post 1000 ml/min ECP201L Preparative Pump appeared first on Icon Scientific Inc..

]]> Preparative HPLC pump with a flow rate range of up to 1000 ml/min.

 

The ECP201L Preparative Pump is an innovative, powerful, and cost-effective unit for preparative liquid chromatography where high pressure is needed. The pump with 4 low-pressure valves delivers a flow rate of up to 1000 ml/min at a very high output pressure of up to 15 MPa (2176 psi).

Main features and benefits

  • Durability – The pump is constructed for high pressure and flow rates. This makes it suitable for day-to-day long-term use in production
  • Wide application possibilities – The unit is used for pharmaceutical separations and plant extract purification, such as cannabinoids, peptides, and oligonucleotides. Also, it has much wider use in other chemical production, such as dosing into chemical reactors, and in various laboratory uses. Another advantage is the usability of the same device for separation method development.
  • Smart controls and diagnostics – It is easy to operate, especially with ECOMAC and Clarity software. This makes unit management powerful and convenient. The basic version of the ECOMAC software is available free of charge. It is also used for service and diagnostics.
  • Other useful features
    • A new learning algorithm for pulsation suppression
    • A leakage sensor
    • A seal wash kit for longer piston seal life
    • Also available in configurations made of certified bio-inert materials

The post 1000 ml/min ECP201L Preparative Pump appeared first on Icon Scientific Inc..

]]> 3000 ml/min ECP301L Preparative Pump https://www.iconsci.com/shop/3000-ml-min-ecp301l-preparative-pump/ Wed, 25 Jan 2023 17:53:30 +0000 https://www.iconsci.com/?post_type=product&p=4811 Preparative HPLC pump with a very high flow rate of up to 3000 ml/min at the output pressure of up to […]

The post 3000 ml/min ECP301L Preparative Pump appeared first on Icon Scientific Inc..

]]> Preparative HPLC pump with a very high flow rate of up to 3000 ml/min at the output pressure of up to 5 MPa (725 psi).

 

 

Preparative HPLC pump with a very high flow rate of up to 3000 ml/min at the output pressure of up to 5 MPa (725 psi).
The ECP301 L preparative pump is an innovative, powerful, and cost-effective unit for preparative liquid chromatography where high pressure is needed. It has 2 pistons connected in parallel, with a 1.5 ” (38,1 mm) diameter.

  • Durability – The pump is constructed for high pressure and flow rates. This makes it suitable for day-to-day long-term use in production.
  • Smart controls and diagnostics – It is easy to operate, especially with ECOMAC and Clarity software. This makes unit management powerful and convenient. The basic version of the ECOMAC software is available free of charge. It is also used for service and diagnostic.
  • Other useful features
    •  A new learning algorithm for pulsation suppression
    • A leakage sensor
    • A seal wash kit for longer piston seal life
  • Also available in configurations made of certified bio-inert materials

 

The post 3000 ml/min ECP301L Preparative Pump appeared first on Icon Scientific Inc..

]]> ICP-2200 Preparative Pump https://www.iconsci.com/shop/icp-2200-preparative-pump/ Wed, 03 Feb 2021 22:25:33 +0000 https://www.iconsci.com/?post_type=product&p=4686 Preparative HPLC pump with a flow rate range up to 250 ml/min, with very high back pressure. It can pump […]

The post ICP-2200 Preparative Pump appeared first on Icon Scientific Inc..

]]> Preparative HPLC pump with a flow rate range up to 250 ml/min, with very high back pressure. It can pump against 4351 psi at 100 ml/min. Two pistons run in parallel with a 3/8″ diameter. Suitable where high pressure is needed. Advantage of ICP 2200 is very stable runs even at low flow rates. Stand alone unit. Can be used as a high pressure gradient. Control board is mounted on the back so installation is very easy. A pressure sensor is optional.

 

Flow rate 0.5 – 250 ml/min
Maximum operating pressure 30 MPa (4351 psi) up to 100 ml/min; 15 MPa (2176 psi) at 250 ml/min
Flow rate setting 0.1 ml/min steps
Repeatability of flow rate adjusting ± 1 %
Accuracy of flow rate setting ± 2 %
Wetted materials stainless steel, PEEK, TefzelTM, PE, ceramic, seals
Communication RS232,Ethernet (LAN),USB
Power supply 100 240V 50/60Hz 250VA
Dimensions W x H x D 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)
Weight 13.5 kg (30 lb)
Output capillary outer diameter 1/8”
Input tubing outer diameter 3/16”
Upper pressure limit (MPa) 1– 30 (4351PSI)
Precision of pressure measurement ± 2%
Supported Gradient Box ECB2005, ECB2005PC

The post ICP-2200 Preparative Pump appeared first on Icon Scientific Inc..

]]> ICP-2050 Preparative Pump https://www.iconsci.com/shop/icp-2050-preparative-pump/ Wed, 03 Feb 2021 21:51:05 +0000 https://www.iconsci.com/?post_type=product&p=4680 Can be used as an isocratic pump or together with a gradient module as a gradient pump. For preparative liquid […]

The post ICP-2050 Preparative Pump appeared first on Icon Scientific Inc..

]]> Can be used as an isocratic pump or together with a gradient module as a gradient pump. For preparative liquid chromatography applications.

Preparative HPLC pump with a flow-rate range up to 50 ml/min and 4,351 psi. A quaternary gradient can be made by adding the gradient module. This pump is available in stainless steel. The gradient profile can be defined from computer or manually by using the display and keypad.

 

Flow rate 0.1 – 50 ml/min
Maximum operating pressure 30 MPa (4351 PSI)
Flow rate setting 0.1 ml/min steps
Repeatability of flow rate adjusting ± 0.5 %
Accuracy of flow rate setting ± 2 %
Wetted materials stainless steel, PEEK, TefzelTM, PE, ceramic, seals
Communication RS232,Ethernet (LAN),USB
Control RS232, Ethernet(LAN), USB
Power supply 100-240V 50/60Hz 100VA
Dimensions W x H x D 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in)
Weight 12 kg (26,5 lb)
Output capillary outer diameter 1/16”
Input tubing outer diameter 1/8”
Upper pressure limit (MPa) 0.1 – 30 (4351PSI)
Precision of pressure measurement ± 2 %
Supported Gradient Box ECB2007, ECB2007PC

 

The post ICP-2050 Preparative Pump appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-2/ Tue, 28 Aug 2018 18:01:00 +0000 https://www.iconsci.com/products/azurap41s-2/ Ultra-compact high pressure pump

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

The AZURA pump P 4.1S (APG20EC) is developed for the eluent delivery with flow rates up to 10 ml/min and a maximum delivery pressure of 400 bar. This compact pump can easily be integrated into every HPLC system. It can be used as a small HPLC pump, an injection module or dosing pump. This device variant is the chemical resistant version with a pump head made of Hastelloy® C.

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Hastelloy® C-276
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), FFKM, Titanium, aluminum oxide (Al2O3), Hastelloy® C, KEL-F® (PCTFE), ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1−8.0 ml/min
Continuous working conditions 0.1−4.0 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd20/ Fri, 13 Apr 2018 13:57:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20/ pump head not included

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> without pump head

The preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications.

Technical Data

Communication

Interfaces Display
Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management yes

Detailed information

Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd30ka/ Fri, 13 Apr 2018 13:49:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20ka/ 100 ml pump head SS

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 100 ml pump head, stainless steel

The preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 100 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Stainless Steel
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials stainless steel, GFP (graphite fiber reinforced PTFE), FKM, PEEK, sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.01-80 ml/min
Continous working conditions 0.1-40 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd60mc/ Fri, 13 Apr 2018 13:37:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20mc/ 500 ml pump head Ti

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 500 ml pump head, titanium

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 500 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 1450 psi
Maximum delivery pressure [bar] 100 bar
Maximum delivery pressure [MPa] 10 MPa
Pump head materials Titanium
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials Titanium, aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 1-400 ml/min
Continous working conditions 2-200 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd60kb/ Fri, 13 Apr 2018 13:30:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20kb/ 100 ml pump head Ti

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 100 ml pump head, titanium

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 100 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Titanium
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials Titanium, GFP (graphite fiber reinforced PTFE), aluminum oxide (Al2O3), PEEK, FKM, ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.01-80 ml/min
Continous working conditions 0.1-40 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd30ma/ Fri, 13 Apr 2018 13:24:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20ma/ 500 ml pump head SS

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 500 ml pump head, stainless steel

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 500 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 1450 psi
Maximum delivery pressure [bar] 100 bar
Maximum delivery pressure [MPa] 10 MPa
Pump head materials Stainless Steel
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials stainless steel, aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire

Detailed information

Best working conditions 1-400 ml/min
Continous working conditions 2-200 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd20la/ Fri, 13 Apr 2018 11:38:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20la/ 250 ml pump head SS

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 250 ml pump head, stainless steel

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 250 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 2900 psi
Maximum delivery pressure [bar] 200 bar
Maximum delivery pressure [MPa] 20 MPa
Pump head materials Stainless Steel
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials stainless steel, aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire

Detailed information

Best working conditions 0.01-200 ml/min
Continous working conditions 0.1-100 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd60lc/ Thu, 12 Apr 2018 16:12:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20lc/ 250 ml pump head Ti

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 250 ml pump head, titanium

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 250 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 2900 psi
Maximum delivery pressure [bar] 200 bar
Maximum delivery pressure [MPa] 20 MPa
Pump head materials Titanium
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials Titanium, aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.01-200 ml/min
Continous working conditions 0.1-100 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd30na/ Thu, 12 Apr 2018 15:52:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20na/ 1000ml pump head SS

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 1000 ml pump head, stainless steel

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 1000 ml/min
Flow rate range 1-1000ml
Flow rate increment 0.1 ml/min
Maximum delivery pressure [psi] 730 psi
Maximum delivery pressure [bar] 50 bar
Maximum delivery pressure [MPa] 5 MPa
Pump head materials Stainless Steel
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials stainless steel, aluminum oxide (Al2O3), FKM, PEEK, ruby, sapphire, GFP (graphite fiber reinforced PTFE)

Detailed information

Best working conditions 2-800 ml/min
Continous working conditions 2-400 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd60na/ Thu, 12 Apr 2018 15:34:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20nb/ 1000 ml pump head Ti

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> with 1000 ml pump head, titanium

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 1000 ml/min
Flow rate range 1-1000ml
Flow rate increment 0.1 ml/min
Maximum delivery pressure [psi] 730 psi
Maximum delivery pressure [bar] 50 bar
Maximum delivery pressure [MPa] 5 MPa
Pump head materials Titanium
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management –
Wetted materials Titanium, aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 2-800 ml/min
Continous working conditions 2-400 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s/ Fri, 09 Feb 2018 16:26:00 +0000 https://www.iconsci.com/products/azurap41s/ 50 ml/min pump head, stainless steel

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

AZURA P 2.1S and P 4.1S pump are developed for eluent delivery up to 400 bar and for flow rates up to 10 ml/min in HPLC and other applications where a compact easy-to-integrate pump is required.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01−50 ml/min
Flow rate increment 0.01
Maximum delivery pressure [psi] 2180 psi
Maximum delivery pressure [bar] 150 bar
Maximum delivery pressure [MPa] 15 MPa
Pump head materials Stainless Steel
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), aluminum oxide (Al2O3), FKM, PEEK, ruby, sapphire, stainless steel, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 1.0−40.0 ml/min
Continous working conditions 3−25 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-apg20fb/ Fri, 09 Feb 2018 16:16:00 +0000 https://www.iconsci.com/products/azurap41s-apg20fb/ 50 ml/min pump head, ceramic

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

AZURA P 2.1S and P 4.1S pump are developed for eluent delivery up to 400 bar and for flow rates up to 10 ml/min in HPLC and other applications where a compact easy-to-integrate pump is required.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01−50 ml/min
Flow rate increment 0.01
Maximum delivery pressure [psi] 2180 psi
Maximum delivery pressure [bar] 150 bar
Maximum delivery pressure [MPa] 15 MPa
Pump head materials Ceramic
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), Titanium, aluminum oxide (Al2O3), ceramic, FKM, PEEK, sapphire, ruby, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 1.0−40.0 ml/min
Continous working conditions 3−25 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-apg20ea/ Fri, 09 Feb 2018 16:02:00 +0000 https://www.iconsci.com/products/azurap41s-apg20ea/ 10 ml/min pump head, stainless steel

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Stainless steel pump head

The AZURA pump P 4.1S (APG20EA) is developed for the eluent delivery with flow rates up to 10 ml/min and a maximum delivere pressure of 400 bar. This compact pump can easily be integrated into every HPLC system. It can be used as a small HPLC pump, an injection module or dosing pump. This device variant is the standard version with a pump head made of stainless steel.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Stainless Steel
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), Titanium, ruby, sapphire, aluminum oxide (Al2O3), FKM, PEEK, Zirconium oxide
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1−8.0 ml/min
Continous working conditions 0.1−4.0 ml/min
Flow rate accuracy ±1%
Flow rate accuracy conditions 5 – 50% of flow range using ethanol/water 10:90
Flow rate precision measured at 1 ml/min using ethanol/water 10:90
Flow rate precision conditions ≤ 0.5 % RSD
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-apg20ef/ Fri, 09 Feb 2018 15:53:00 +0000 https://www.iconsci.com/products/azurap41s-apg20ef/ 10 ml/min pump head, ceramic, Ti-Connections

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

Die AZURA Pumpe P 4.1S (APG20EF) wurde für die Eluentförderung mit Flussraten von bis zu 10 ml/min und einem maximalen Druck von 400 bar entwickelt. Diese kompakte Pumpe kann als einfache HPLC Pumpe, als Injektionsmodul oder Dosierpumpe genutzt werden. Diese Gerätevariante mit einem Pumpenkopf aus Keramik ist die bioinert Version .

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Ceramic
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), Titanium, ceramic, FKM, PEEK, ruby, sapphire, aluminum oxide (Al2O3)
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1−8.0 ml/min
Continous working conditions 0.1−4.0 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> AZURA P 4.1S https://www.iconsci.com/shop/azurap41s-apg20eb/ Fri, 09 Feb 2018 15:45:00 +0000 https://www.iconsci.com/products/azurap41s-apg20eb/ 10 ml/min pump head, ceramic

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

The AZURA pump P 4.1S (APG20EB) is developed for the eluent delivery with flow rates up to 10 ml/min and a maximum delivere pressure of 350 bar. This compact pump can easily be integrated into every HPLC system. It can be used as a small HPLC pump, an injection module or dosing pump. This device variant is the bio-inert version with a pump head made of ceramic.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5080 psi
Maximum delivery pressure [bar] 350 bar
Maximum delivery pressure [MPa] 35 MPa
Pump head materials Ceramic
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials GFP (graphite fiber reinforced PTFE), Titanium, FKM, aluminum oxide (Al2O3), ceramic, ruby, PEEK, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.1−8.0 ml/min
Continous working conditions 0.1−4.0 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

     

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

     

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 4.1S appeared first on Icon Scientific Inc..

]]>