FPLC Pumps – Icon Scientific Inc. https://www.iconsci.com Highest Quality Liquid Chromatography Products & Service Mon, 26 Oct 2020 18:19:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.iconsci.com/wp-content/uploads/2019/03/favicon.png FPLC Pumps – Icon Scientific Inc. https://www.iconsci.com 32 32 BlueShadow Pump 80P https://www.iconsci.com/shop/blueshadowpump80p-apd20/ Fri, 13 Apr 2018 13:57:00 +0000 https://www.iconsci.com/products/blueshadowpump80p-apd20/ pump head not included

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> without pump head

The preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications.

Technical Data

Communication

Interfaces Display
Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 – 240 V, 50 – 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management yes

Detailed information

Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 – 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

    • Manual
    • English
    • PDF
    • 3.1 MB
    Download

  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
    Download

The post BlueShadow Pump 80P appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph65eb/ Thu, 08 Mar 2018 11:25:00 +0000 https://www.iconsci.com/products/azurap61l-aph65eb/ Binary Azura pump P6.1L,pressure range 400 bar

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> Binary Azura pump P6.1L,pressure range 400 bar up to 10ml/min, flow rate range 0,001-10ml/min,
Ceramic with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph64eb/ Tue, 13 Feb 2018 15:13:00 +0000 https://www.iconsci.com/products/azurap61l-aph64eb/ Quaternary LPG gradient 10 ml / min Ceramic with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Quaternary low pressure gradient pump with 10 ml pump head, Ceramic

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pressure range
Pump head materials Ceramic
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 250 µl
Delay volume 350 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph68fb/ Tue, 13 Feb 2018 12:30:00 +0000 https://www.iconsci.com/products/azurap61l-aph68fb/ Binary High pressure gradient 50 ml / Min Ceramic W/O degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L High Pressure Pump with 50 ml pump head, Ceramic, without Degasser

Technical Data

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range
Pump head materials Ceramic
Gradient High Pressure Gradient (binary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), FKM, sapphire, zirconium oxide (ZrO2), PEEK, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 40 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 5 – 95 %
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar (ethanol/caffeine tracer) ± 1 % (5 – 95 %, measured at 0.1 – 10 ml/min, water/caffeine tracer)
Gradient precision < 0.1 % RSD at 1 ml/min, 0.3% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 250 µl
Delay volume 310 µl with 250 µl Mixer
Pump type Binary analytical HPLC pump with degasser
Degasser No
Solvent selection valve 2 x 2 channels
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 14.1 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph60eb/ Mon, 12 Feb 2018 18:48:00 +0000 https://www.iconsci.com/products/azurap61l-aph60eb/ 10 ml / min Ceramic isocratic pump

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Isocratic Pump with 10 ml pump head, Ceramic

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pressure range
Pump head materials Ceramic
Gradient isocratic
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range  
Gradient minimum increment  
Degasser No
Solvent selection valve No
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 11.5 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

     

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

     

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph60fb/ Mon, 12 Feb 2018 17:42:00 +0000 https://www.iconsci.com/products/azurap61l-aph60fb/ 50 ml / min Ceramic isocratic pump

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Isocratic Pump with 50 ml pump head,Ceramic

Technical Data

General Information

Max. flow rate 50 ml/min
Flow rate range 0.01 – 50 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 4350 psi
Maximum delivery pressure [bar] 300 bar
Maximum delivery pressure [MPa] 30 MPa
Pressure range
Pump head materials Ceramic
Gradient isocratic
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 40 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range  
Gradient minimum increment  
Degasser No
Solvent selection valve No
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Weight 11.5 kg
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

     

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

     

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 2.1S https://www.iconsci.com/shop/azurap21s-apg90eb/ Thu, 08 Feb 2018 17:47:00 +0000 https://www.iconsci.com/products/azurap21s-apg90eb/ 10 ml/min pump head, ceramic, without pressure sensor

The post AZURA P 2.1S appeared first on Icon Scientific Inc..

]]> Ultra-compact high pressure pump

The AZURA pump P 2.1S (APG90EB) is developed for the eluent delivery with flow rates up to 10 ml/min and a maximum delivere pressure of 350 bar. This compact pump can easily be integrated into every HPLC system. It can be used as a small HPLC pump, an injection module or dosing pump. This device variant is the bio-inert version with a pump head made of ceramic.

Technical Data

Communication

Interfaces display
Control RS-232; analog; button on device
Analog inputs 0−10V

General

Power supply 100−240 V; 50−60 Hz
Dimensions 121 x 129 x 220 mm
Weight 2.3 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001−10 ml/min
Flow rate increment 0.001
Maximum delivery pressure [psi] 5080 psi
Maximum delivery pressure [bar] 350 bar
Maximum delivery pressure [MPa] 35 MPa
Pump head materials Ceramic
Maximum viscosity 100 cp
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient isocratic
Leak management no
Wetted materials aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire, Zirconium oxide, ceramic

Detailed information

Best working conditions 0.1−8.0 ml/min
Continous working conditions 0.1−4.0 ml/min
Pump type Ultra-compact high pressure pump
Pulsation compensation no
Active piston seal wash no
Piston seal washing yes
System protection
  • Pmin and Pmax adjustable
  • Imin and Imax adjustable
Pump head inlet (standard) 1/4″-28 UNF (flat bottom)
Pump head outlet (standard) 10−32 UNF (coned)

Downloads and more information

  • AZURA Pump P 4.1S / P 2.1S User Manual EN (V6870)

    • Manual
    • English
    • PDF
    • 2.5 MB
    Download

  • AZURA Pumpe P 4.1S / P 2.1S Benutzerhandbuch DE (V6870)

    • Manual
    • German
    • PDF
    • 1.8 MB
    Download

The post AZURA P 2.1S appeared first on Icon Scientific Inc..

]]>