Standard configuration includes:

• 2 vial racks with 60 vials per rack
• Reagent vial holder (derivatization option)
• Wash port (needle cleaning)
• Injection valve with integrated injection port
• 100 I sample loop
• Optional – sample rack heating/cooling module

The post Sykam Autosampler appeared first on Icon Scientific Inc..

HT1500L/ – uses standard consumables
– offers the capability to automate up to 45 samples. By supporting multiple racks – each of them removable – allows for continuous feeding and convenient operation.

Easy-To-Operate

Keypad operations enable simple automation of any existing HPLC and makes the autosampler easy to control by any chromatography software.
HT1500L comes with HTA Autosampler Manager (Standard Version), our complimentary software control for autosampler programming. After setting your method once, just load samples and press START

NO FRILLS

Is your HPLC routine calling for automation? Look no further than the HT1500L; an autosampler designed for HPLC, fully equipped with powerful features.
Unlike LC-MS, nanoLC and UHPLC systems the HPLC system requires few, essential features: excellent analytical performance, good sample capacity, and of course, uncompromised reliability, robustness and durability.
We have designed the HT1500L with all essential features a cutting-edge HPLC system calls for, while eliminating anything unnecessary to keep your costs as a minimum. No frills. No compromise.

No Compromise on Quality

While we have struggled to achieve a low price, we haven’t made any compromise on quality.
HT1500L has a strong commitment to quality that focuses on providing a real unattended experience: HT1500L will be your workhorse requiring very few or no attention from lab technicians. The materials have been picked up to provide longevity; the up-to-date technologies offer reliability that deserve a modern instrument while the design attests our care in details.

Technical Specifications

The post No Frills HPLC AUTOSAMPLER appeared first on Icon Scientific Inc..

Key Features

EASY TO USE

Easy to use, easy to install and easy to service. We believe in a “robust by design” approach: HT4000L – based on cutting edge technologies and DFX design – well incarnates this philosophy making itself the ideal instrument for installation in any scenario.
Full loop is performed with very high accuracy values, while partial loop also allows sample saving. The variable fill
speed and the viscosity delay allow a wide range of sample viscosities; programmable sampling depth assures high sample recovery capacity. All the routine operations such as analysis start, sample loading and extra wash can be managed by its dedicated keypad. Set your method once using the complimentary HTA Autosampler Manager, then you just need to load samples and press START: experience a seamless integration with your Chromatography Data System.

LARGE SAMPLE CAPACITY

HT4000L can handle up to 176 2ml-vials per run or it can work with different kinds of sample vessels. Inject samples out of vials (2/4/6/10/20/40 ml), test tubes, tube blocks or plates.
Save on consumables avoiding needs for sample reformatting. Choose from standard racks or enquire for a custom design: custom racks pay for themselves in a few weeks. Furthermore, racks are easily interchangeable in order to allow quick switching across multiple configurations.No compromise in terms of solvent capacity and solvent selection: we have a wide capacity to accommodate the most challenging requests. Solvents can be located in vials (for accurate micro- or nano-volume dispensing) or in bottles (for large-volume dispensing). Additional solvents modules may also be implemented in the field in case requirements change over the time.No need for solvent degassing. While some autosamplers require a devoted degasser line or to degas offline wash solvent on each bottle refill, we do not. Enjoy HT4000L: less system requirement, less pain, less troubleshooting!

APPLICATION VERSATILITY

HT4000L fits all liquid chromatography systems. It is able to look after the widest range of applications including analytical, prep, UHPLC, IC, nano, LC/ MS… and many more.

Within the standard configuration the autosampler is equipped with an automatic 6-port 2-way injection valve for analytical applications. However, a wide selection of valves for inert or extended pressure applications are also available as per special injection ports for applications where no valve is needed.

MODULAR AND SCALABLE

A wide range of accessories can be sourced and added in the field at any time. Contact your sales representative about your application requirement. Too many options? Don’t worry; you don’t pay for features you don’t need. We provide your LC autosampler at the best possible price; at the time your needs change you can add optional accessories to perform the new tasks without the hassle of buying a new autosampler. Your investment is future proof!

LAB AUTOMATION READY

HT4000L can fully automate your sample prep. It can work as a standard HPLC autosampler. However you may want to delegate some sample preparation tasks: HT4000L can take care of them as no standard autosampler has been able to assist.

Dilution, precolumn derivatisation, pH spiking and internal standard addition are available within the standard
version: no extra cost required. These operations can be performed in place or in an empty vial by sample dispatching.

If standard sample preparation capabilities are not enough, get the HTAPREP option. Using HTAPREP – lab automation software – you can add support to complex and custom autosampler methods. Design your own methods by Drag&Drop of autosampler functions (e.g. draw, dispense, mix, inject…) and start processing samples with the smart processing engine that allows you to optimise productivity and reagent consumption.

Endless possibilities: any sample preparation procedure or complex sample introduction become available: check the brochure of HT4000A (off-line version of HT4000L) to discover more.

UHPLC READY

UHPLC applications require an extended pressure range and a reduced amount of injected sample. HT4000L is optimised for such requirements and can be supplied with an UHPLC injection valve or can be upgraded in the field at a later time.Also in this configuration HT4000L features extraordinary analytical performance with the highest reliability.

LARGE-VOLUME CAPABILITY

The only real autosampler choice in the market for large-volume applications.We provide you with everything you need for your large-volume applications: large sample vessel support, large injections up to 10ml, large solvent capacity, large bore size injection valve (or injection port) for real and complete automation.

BIOCOMPATIBLE

To handle more complex samples and to assure covering a wider pH range, inert flow path valves are available. No need to compromise when it comes to running metal-sensitive samples or corrosive solvents/buffers.

Furthermore, biocompatible applications can take advantage of the double wash step capability: as pre- and post-wash solvent in addition to A, B… F solvents you can also choose a combination of A+B, A+C…. F+E solvents for superior analytical performance (carryover adverse!).

COOLING

The Cooling Module offers the capability to maintain samples at a controlled temperature. The cooling option upgrade can be performed in the field in a very short time: you don’t need to make a decision about cooling at the time the autosampler is sourced!

Technical Specifications

The post The HPLC autosampler lab-automation ready appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. Preparative version for sample volumes up to 10 ml with sample tray cooling (4 – 40°C).

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. Preparative version for sample volumes up to 10 ml.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. “partial loop filling” (variable volumes, e.g. for dilution series) is supported. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. Preparative version for sample volumes up to 10 ml with biocompatible flow path.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. With sample tray cooling (4 – 22°C) and biocompatible sample path.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. With biocompatible sample path.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. For high-pressure injections of up to 1240 bar, the autosampler is equipped with a so-called ILD™ valve (Intermediate Loop Decompression). This valve consists of a rotor-stator combination and includes a central port for depressurizing. For highpressure applications, the sample loop is depressurized prior to receiving the sample. This way, the sample is not diluted with solvent. Because the valve is switched extremely fast, pressure spikes are reduced. Analyses are more precise and wear of the column is reduced.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. For high-pressure injections of up to 700 bar, the autosampler is equipped with a so-called ILD™ valve (Intermediate Loop Decompression). This valve consists of a rotor-stator combination and includes a central port for depressurizing. For high pressure applications, the sample loop is depressurized prior to receiving the sample. This way, the sample is not diluted with solvent. Because the valve is switched extremely fast, pressure spikes are reduced. Analyses are more precise and wear of the column is reduced.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. For high-pressure injections of up to 1240 bar, the autosampler is equipped with a so-called ILD™ valve (Intermediate Loop Decompression). This valve consists of a rotor-stator combination and includes a central port for depressurizing. For highpressure applications, the sample loop is depressurized prior to receiving the sample. This way, the sample is not diluted with solvent. Because the valve is switched extremely fast, pressure spikes are reduced. Analyses are more precise and wear of the column is reduced.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..

The Autosampler AS 6.1L can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 108 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective interior and exterior needle wash procedure. This autosampler is also fast and flexible: one complete sample injection cycle takes less than one minute, including needle wash. Three different injection modes are supported; “full loop filling” (highest precision and reproducibility), “partial loop filling” (variable volumes, e.g. for dilution series) and “µl pickup” (loss-free injection of extremely small sample volumes), allowing the user to optimize sample usage. The headspace pressure function prevents bubbles from forming in the vial during sample uptake. Precolumn derivatization is supported. For high-pressure injections of up to 700 bar, the autosampler is equipped with a so-called ILD™ valve (Intermediate Loop Decompression). This valve consists of a rotor-stator combination and includes a central port for depressurizing. For high pressure applications, the sample loop is depressurized prior to receiving the sample. This way, the sample is not diluted with solvent. Because the valve is switched extremely fast, pressure spikes are reduced. Analyses are more precise and wear of the column is reduced.

Technical Data

The post Autosampler AS 6.1L appeared first on Icon Scientific Inc..