Quaternary gradient pump – Icon Scientific Inc. https://www.iconsci.com Highest Quality Liquid Chromatography Products & Service Mon, 26 Oct 2020 18:17:57 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.iconsci.com/wp-content/uploads/2019/03/favicon.png Quaternary gradient pump – Icon Scientific Inc. https://www.iconsci.com 32 32 AZURA LPG module for Pump P 2.1L in PEEK https://www.iconsci.com/shop/azuralpgmoduleforpumpp21linpeek/ Tue, 13 Feb 2018 16:12:00 +0000 https://www.iconsci.com/products/azuralpgmoduleforpumpp21linpeek/ Ternary LPG module for flow rates up to 220 ml/min, PEEK.

The post AZURA LPG module for Pump P 2.1L in PEEK appeared first on Icon Scientific Inc..

]]> By adding the AZURA LPG module to the AZURA preparative HPLC pump P 2.1L, the isocratic pump can be transformed to a ternary low pressure gradient system.# DELIVERIES STARTING NOVEMBER 2015

Technical Data

General Information

Flow rate range 2 – 220 ml/min
Gradient Low Pressure Gradient (ternary)
Wetted materials FFKM, PEEK

The post AZURA LPG module for Pump P 2.1L in PEEK appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph34ga/ Tue, 13 Feb 2018 15:48:00 +0000 https://www.iconsci.com/products/azurap61l-aph34ga/ Quaternary Azura pump 6.1L LPG for UHPLC, pressure range to 1000 bar up to 5ml/min, stainless steel

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Low Pressure Pump with 5 ml pump head, stainless steel

Technical Data

General Information

Max. flow rate 5 ml/min
Flow rate range 0.001 – 5 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 14500 psi
Maximum delivery pressure [bar] 1000 bar
Maximum delivery pressure [MPa] 100 MPa
Pressure range
Pump head materials Stainless Steel
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.02 – 5 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 160 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph34ea/ Tue, 13 Feb 2018 15:35:00 +0000 https://www.iconsci.com/products/azurap61l-aph34ea/ Quaternary low pressure gradient pump 10 ml / min S.S. with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Low Pressure Pump with 10 ml pump head, Ceramic

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 10150 psi
Maximum delivery pressure [bar] 700 bar
Maximum delivery pressure [MPa] 70 MPa
Pressure range
Pump head materials Stainless Steel
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 100 µl
Delay volume 160 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L https://www.iconsci.com/shop/azurap61l-aph64eb/ Tue, 13 Feb 2018 15:13:00 +0000 https://www.iconsci.com/products/azurap61l-aph64eb/ Quaternary LPG gradient 10 ml / min Ceramic with degasser

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]> AZURA P 6.1L Quaternary low pressure gradient pump with 10 ml pump head, Ceramic

Technical Data

General Information

Max. flow rate 10 ml/min
Flow rate range 0.001 – 10 ml/min
Flow rate increment 0.001 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pressure range
Pump head materials Ceramic
Gradient Low Pressure Gradient (quarternary)
Leak management Yes
Wetted materials GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al2O3)

Detailed information

Best working conditions 0.1 – 8.0 ml/min
Continous working conditions 0.1 – 4.0 ml/min
Flow rate accuracy < 1 %
Flow rate accuracy conditions measured at 5-80 % of flow range, using ethanol
Flow rate precision 0.1 % RSD
Flow rate precision conditions based on the retention time at constant room temperature
Gradient range 0 – 100%
Gradient range (recommended) 1 – 99%
Gradient accuracy ± 0.3 % at 1 ml/min, 150 bar ethanol/caffeine tracer) ± 2 % (1 – 99 %, measured at 5 – 50 % of the flow range, water/caffeine tracer)
Gradient precision < 0.1% RSD at 1 ml/min, 0.5% RSD overall, based on retention time at constant room temperature
Gradient minimum increment 0.1 %
Mixing volume 250 µl
Delay volume 350 µl
Degasser Yes
Pulsation < 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation Active pressure and pulsation compensation
Active piston seal wash Yes
Piston seal washing Yes
System protection Soft start, Pmin und Pmax are programmable
Pump head inlet (standard) UNF 1/4-28 Thread
Pump head outlet (standard) UNF 10-32 Thread

Communication

Interfaces LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control LAN, Analog and event control, Mobile Control
Analog inputs Flow rate, 0 – 10 V via pin header connectors
Analog outputs 8 event outputs (TTL, OC, Relais) and 24 V

General

Power supply 100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions 361 mm x 208.2 mm x 523 mm (W × H × D)
Leak sensor Yes
Ambient conditions 4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Downloads and more information

  • AZURA Pump P 6.1L User Manual EN (V6890)

    • Manual
    • English
    • PDF
    • 1.1MB
    Download

  • AZURA Pumpe P 6.1L Benutzerhandbuch DE (V6890)

    • Manual
    • German
    • PDF
    • 1.1 MB
    Download

The post AZURA P 6.1L appeared first on Icon Scientific Inc..

]]>