Preparative HPLC pump with a flow rate range up to 250 ml/min, with very high back pressure. It can pump against 4351 psi at 100 ml/min. Two pistons run in parallel with a 3/8″ diameter. Suitable where high pressure is needed. Advantage of ICP 2200 is very stable runs even at low flow rates. Stand alone unit. Can be used as a high pressure gradient. Control board is mounted on the back so installation is very easy. A pressure sensor is optional.
| Flow rate | 0.5 – 250 ml/min |
| Maximum operating pressure | 30 MPa (4351 psi) up to 100 ml/min; 15 MPa (2176 psi) at 250 ml/min |
| Flow rate setting | 0.1 ml/min steps |
| Repeatability of flow rate adjusting | ± 1 % |
| Accuracy of flow rate setting | ± 2 % |
| Wetted materials | stainless steel, PEEK, TefzelTM, PE, ceramic, seals |
| Communication | RS232,Ethernet (LAN),USB |
| Power supply | 100 240V 50/60Hz 250VA |
| Dimensions W x H x D | 280 x 135 x 498 mm (11.02 x 5.12 x 18.23 in) |
| Weight | 13.5 kg (30 lb) |
| Output capillary outer diameter | 1/8” |
| Input tubing outer diameter | 3/16” |
| Upper pressure limit (MPa) | 1– 30 (4351PSI) |
| Precision of pressure measurement | ± 2% |
| Supported Gradient Box | ECB2005, ECB2005PC |
ICON Scientific, Inc
