Mini CORI-Flow (M13) flowmeter (Hastelloy)

Product No:

A5395

with mounting block

SKU: A5395 Category:

with mounting block

Mini CORI-Flow are precise and compact mass flowmeters and controllers, based on the Coriolis measuring principle. Coriolis flowmeters are unmatched in accuracy. When applied for liquids, the mass flow accuracy is better than ±0,2% Rd.

Instruments of the mini CORI-Flow series contain a uniquely shaped, single loop sensor tube, forming part of an oscillating system. When a fluid flows through the tube, Coriolis forces cause a variable phase shift, which is detected by sensors and fed into the integrally mounted pc-board. The resulting output signal is strictly proportional to the real mass flow rate. The mini CORI-Flow features density and temperature of the fluid as secondary outputs.

Technical Data

Flowmeter

Flow rate range 0.2 – 50 ml/min
Flow rate accuracy ± 0.2 % of rate *
Wetted materials stainless steel AISI 316 or equivalent optional Hastelloy-C22

Communication

Outputs 0 – 5 (10) Vdc or 0 (4) – 20 mA
Control standard: RS–232 (8-pinDIN male connection) Profibus-DP® bus:(5-pin M12 female; power 8-pin DIN male) DeviceNet™ Modebus-RTU; LonWorks Flow bus (5–pin M12 male)

General

Power supply +15–24VDC ±10 % max. ripple recommended: 50mV tt
Weight Meter: 1.2 kg Controller: 1.7 kg

Other

Note * optimal accuracy will be reach after approx. 30 minutes after instrument power up

Downloads and more information

  • Flowmeter mini Cori-Flow

    Flowmeter mini Cori-Flow

    • Brochure
    • English
    • PDF
    • 1.2 MB