BlueShadow Pump 80P

Product Nr.:APD20KB

with 100 ml pump head, titanium

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

Communication

Control LAN; RS-232; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 - 240 V, 50 - 60 Hz
Dimensions 361 x 208,2 x 523 mm (B x W D)
Weight 19 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)

General Information

Max. flow rate 100 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 5800 psi
Maximum delivery pressure [bar] 400 bar
Maximum delivery pressure [MPa] 40 MPa
Pump head materials Titanium
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management -
Wetted materials Titanium, GFP (graphite fiber reinforced PTFE), aluminum oxide (Al2O3), PEEK, FKM, ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 0.01-80 ml/min
Continous working conditions 0.1-40 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 - 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 - 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 - 95 %, measured at 5 - 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 - 95 %, measured at 5 - 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Downloads and more information

  • AZURA Pumpe P 2.1L Benutzerhandbuch DE (V6840)

     

    • Manual
    • English
    • PDF
    • 3.1 MB
  • List of supported devices in chromatography data systems EN (V1663)

    Device support in KNAUER CDS / KNAUER device support in 3rd party software

    • Information
    • English
    • PDF
    • 328.1 KB
request for a quote